User's Manual

– 11 – AtlasIED.com
Specifications are subject to change without notice.
User Guide BlueBridge Designer II
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: [phone] • Fax: [phone]
Connecting to the Network
Note: If you have used this software with any hardware devices that was previously connected, you may still see them appear in the
Network view as shown in Figure 9. These can be identified by the model number. The RED dot in the upper left corner of the device
window indicates the device is no longer detected. - You can remove the unused hardware device by right clicking on the device you
want to remove and select “Remove Device From Console” or selecting the “Remove All Offline Hardware button as shown in Figure 9.
Once the hardware device is detected on the network and the status indicator is Green, return to the Project View so the device can be
“Mapped” to the design file as shown in Figure 10.
Fig 9