User's Manual

AtlasIED.com – 12 –
Specifications are subject to change without notice.
User GuideBlueBridge Designer II
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: [phone] • Fax: [phone]
Initial Device Connectivity
The BlueBridge digital processors run on a network based infrastructure and are set up and controlled by a host computer via Ethernet
using the BlueBridge Designer software.
A network connection can be made between the computer and BlueBridge DSP one of two ways:
(A) Via a DHCP enabled Router (or a DHCP enabled Server / Switch combination)
(B) Directly using an Ethernet cable (or indirectly via an Ethernet switch)
The primary difference between these two connection methods is the automatic IP address assignment that DHCP provides. In
configuration A, an IP address is automatically assigned. In configuration B, a static IP address needs to be assigned.
BlueBridge Wall ControllersPC
BlueBridge Processor
Configuration A
Configuration B
PoE Switch / Router
PC
BlueBridge Processor