User's Manual

– 15 – AtlasIED.com
Specifications are subject to change without notice.
User Guide BlueBridge Designer II
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: [phone] • Fax: [phone]
Launch the BlueBridge Designer Software
Upon opening the BlueBridge Designer software you will be shown the StartUp window.
It provides 4 possible selections, New Design Project, Open Design Project, and Start Network View & Start Dante View. (Network &
Dante View will also be available to you as a separate button located at the top right of the main Project Design window once you are
working on a DSP project).
Fig 13