User's Manual

– 31 – AtlasIED.com
Specifications are subject to change without notice.
User Guide BlueBridge Designer II
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: [phone] • Fax: [phone]
Matching the Firmware
The AtlasIED BlueBridge family of products contains various types of devices. To assist you in determining which firmware file is
appropriate for your device, refer to the chart below.
Note: The file structure may be different from the date that this list was created. Always check www.AtlasIED.com to keep updated.
#_#_# represents the 3 digit version code of the firmware update.
(BLUE BRIDGE_#_#_#.img)- BB-88, BB-168, BB-816, BB-1616, BB-88DT, BB-168DT, BB-816DT, BB-1616DT
(ATLAS-TSD_#_#_#.img) – TSD-BB44, TSD-BB22
(BB-AEC_#_#_#.img) – BB-168AECDT
(BBWP_#_#_#.img) – BBWP-K1, BBWP-K4, BBWP-S4, BBWP-SW8, BBWP-S4K1
(BB-EB1616-DT_#_#_#.img) – BB-EB1616DT
(BlueBridge PanelTouch_#_#_#.zip) – BBWP-TOUCH7
(BB_SM1_#_#_#.zip) – BB-SM1
Step by Step Guide
The hardware device must be connected and functional before upgrading the firmware. We suggest you follow your hardware’s Quick
Start Guide to get an understanding on how to connect a device to you PC. The guide can be found under the specific product’s section
on the AtlasIED website. Section 1.2 (Network) of this help file will also prove quite useful in helping you connect and troubleshoot any
problems you encounter.
Open the BlueBridge Designer software.
Make sure that the PC is connected to the network (or directly to the device).
If you are not completely sure of your device or network’s IP addressing, please set your computer’s IP address to Automatic (DHCP).
Note: Using an older version of software with a newer firmware or newer software with an older firmware will work but some of the
features may not be available and bugs could exist.