User's Manual

AtlasIED.com – 34 –
Specifications are subject to change without notice.
User GuideBlueBridge Designer II
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: [phone] • Fax: [phone]
Upgrade Procedure
To update the Firmware go into the Network View & right click the device that you would like to update. A box pops up. Select
“Firmware Upgrade” as shown in Figure 46.
An information window will pop up asking if certain you wish to proceed. Select “OK” as seen in Figure 47 only if you’re OK with
wiping ALL data in the device. A project file WILL have to be reloaded.
Fig 46
Fig 47