User's Manual

AtlasIED.com – 36 –
Specifications are subject to change without notice.
User GuideBlueBridge Designer II
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: [phone] • Fax: [phone]
The DSP hardware will automatically go back Online with the factory default file loaded on it.
Note: If you have more than one unit that needs the Firmware to be upgraded you can save time by updating them all at the same
time. This can be done as long as they are the same Network and appear in the Network View page.
Figure 51 shows that the status of the device is now Green and ready for use but does not contain a design file yet. Figure 52 shows
the same unit after a design file has been loaded.
Fig 51
Fig 52