User's Manual

– 37 – AtlasIED.com
Specifications are subject to change without notice.
User Guide BlueBridge Designer II
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: [phone] • Fax: [phone]
Create a System Preset
Module parameters can be saved into one of 70 preset slots for a design file. Presets can only be created in design mode and can be
saved at three different tiers: Device, Module, and Parameter. Open a module and select any parameters that you wish to be added to a
preset. Right click and select “Save Parameter Value to Preset”.
Select a preset to add these parameters to, or if no presets exist, click “Create New Preset” and type in a name for the new preset.
Right click a module to save all settings in that module to a preset. Similarly right click a device and save all parameters in all modules in
that device as a preset. Presets can contain parameters from multiple devices.
Fig 53