User's Manual

– 39 – AtlasIED.com
Specifications are subject to change without notice.
User Guide BlueBridge Designer II
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: [phone] • Fax: [phone]
To save parameters that were changed while in online mode, make use of the parameter value transfer from online to design mode.
When you switch to design mode select yes when prompted to copy device parameters. Now you can add the parameters, modules or
devices to existing or new presets.
Preset Management
Under the Project heading you will find “Project Presets” which lists all presets for the project. Clicking on Project Presets opens up the
Preset Manager.
Fig 56
Fig 57