User's Manual

AtlasIED.com – 40 –
Specifications are subject to change without notice.
User GuideBlueBridge Designer II
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: [phone] • Fax: [phone]
Preset Management can be used to rename copy and remove presets from the project file. To rename a preset, type the desired preset
name for the corresponding preset.
The red box highlights presets that can be controlled by logic inputs. Using the ‘Latch Button’ in conjunction with a BlueBridge
Controller device would be an effective way to quickly recall presets.
For example, you can mute all the inputs at the push of a single button, or use a preset to manage the audio routing to a specific room.
Checking the ‘Remove’ box will delete the preset from your project after saving.
The ‘Presets Copy’ function is used for duplicating presets and moving presets to different preset locations. After creating a preset,
click the ‘Presets Copy’ button to open up the copy menu.
The first dialog asks where you which preset you would like to copy, and the second dialog simply asks which location you would like to
copy to.
Click OK to apply your preset changes.
Fig 58
Fig 59