User's Manual

– 41 – AtlasIED.com
Specifications are subject to change without notice.
User Guide BlueBridge Designer II
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: [phone] • Fax: [phone]
Remove Preset Data
Devices, Modules and Parameters can be removed from a preset using a similar method to adding them. Select the Parameter(s),
Module(s) or Device(s), right click and select “Remove from Current Preset”.
This will remove the data from the currently selected preset as displayed in the drop down menu. A preset must be applied for the
“Remove from Current Preset” to be available.
Control Modules
Control Fader - A generic fader which is used as a reference point for control modules. The control fader can be mapped to an external
controller (Either BlueBridge Control or 3rd party) to allow for a more advanced control structure.
Control Inverter - Inverts the control signal polarity.
Control Range Detector - Set a specific range with high and low threshold values. This module outputs 2 values, one for ‘in range’ and
the other for ‘out of range’. Both of these output values are decided by the user.
Fig 60
Fig 61
Fig 62
Fig 63