User's Manual

– 51 – AtlasIED.com
Specifications are subject to change without notice.
User Guide BlueBridge Designer II
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: [phone] • Fax: [phone]
Loudspeaker Management - This module combines all the normally used modules for Loudspeaker Management in one convenient
module. You can select as many inputs / outputs as needed (In the Component Properties tab) and alter all their parameters in one
easy place. You can find out more about each module in the Loudspeaker Management module by reading up on the different seperate
modules it contains with in their appropriate section of this manual. Module Bypass is just that- It bypasses any processing & just
sends any signal from the input directly to the output.
Delay (0-500ms) is how much delay is introduced to the signal.
HPF (High Pass Filter) passes all frequencies above what it is set for.
LPF (Low Pass Filter) passes frequencies below the set frequency.
PEQ (Parametric EQ) allows set frequencies to have notch or gains added with variable bandwidth as needed.
Limiter This works with the dynamics of the signal, limiting loud signals above the set threshold.
Gain simply adjusts the output as required.
Mute simply mutes all output from the module.
Polarity inverts the source signal.
Fig 87