User's Manual

AtlasIED.com – 58 –
Specifications are subject to change without notice.
User GuideBlueBridge Designer II
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: [phone] • Fax: [phone]
I/O
Analog Input - Analog input entering the DSP processor. The input module contains RMS level Meter (-80 to 40dB, 0.1dB steps),
Gain (- 100 to +15 dB, 0.1dB steps), Mute and Polarity control for each input channel.
Analog Output - Analog output exiting the DSP processor. The output module contains RMS level Meter (-80 to 40dB, 0.1dB steps),
Gain (-100 to +15 dB, 0.1dB steps), Mute and Polarity control for each output channel. Green indicates active physical I/O for your
processor model.
Network Input - Network input entering the DSP processor. The input module contains RMS level Meter (-80 to 40dB, 0.1dB steps),
Gain (-100 to +15 dB, 0.1dB steps), Mute and Polarity control for each input channel.
Network Output - Network output exiting the DSP processor.The output module contains RMS level Meter (-80 to 40dB, 0.1dB steps),
Gain (-100 to +15 dB, 0.1dB steps), Mute and Polarity control for each input channel.
Logic Input - Logic input entering the DSP processor. The input module contains Enable and Inverse control for each input channel.
Logic Output - Logic output exiting the DSP processor. The output module contains Enable and Inverse control for each output channel.
Fig 101
Fig 102
Fig 103