User's Manual

AtlasIED.com – 60 –
Specifications are subject to change without notice.
User GuideBlueBridge Designer II
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: [phone] • Fax: [phone]
XOR - Output logic low If all inputs are the same output is logic low, otherwise logic high.
XNOR - If all inputs are the same output is logic high.
SR-Flip Flop - For each trigger (low-to-high signal) at the Trigger pin, Output Q will switch logic values. The module displays the current
State of the Q pin. Output /Q is always the opposite of Ouput Q. While the Set pin is logic high Output Q will be logic high and While
the Reset I/O is logic high Output Q will be logic low.
Delay - When the input is logic high for at least the On Time (0 to 60s, 1ms steps) the output will be logic high for the On time and
logic low for the Off Time (0 to 60s, 1ms steps). Bypass and output State indicator features present.
Fig 110
Fig 111
Fig 112
Fig 109