User's Manual

– 61 – AtlasIED.com
Specifications are subject to change without notice.
User Guide BlueBridge Designer II
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: [phone] • Fax: [phone]
Multiplexer - Route one of eight inputs to the output using the three Ctrl (Control) I/O’s. Channel selected is shown by the module.
De-Multiplexer - Route the input to one of the eight outputs using the three Ctrl (Control) I/O’s. Channel selected is shown by the
module.
Encoder - Convert eight logic inputs to three binary inputs. Encoded Channel is shown by the module.
Decoder - Convert three binary inputs to eight logic outputs. Decoded Channel is shown by the module.
Fig 114
Fig 115
Fig 116
Fig 113