User's Manual

– 63 – AtlasIED.com
Specifications are subject to change without notice.
User Guide BlueBridge Designer II
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: [phone] • Fax: [phone]
Latch Button - Use the Latch button to output a logic high or logic low signal with ON/OFF. Reverse the logic output with the Inverse
button.
Momentary Button - Creates a trigger (low-to-high signal) event at the output with the ON/OFF. Reverse the logic output with the
Inverse button.
Radio Button - Output a logic high from the output selected with Radio Btn all other outputs are logic low. Reverse all logic outputs on
the module with the Inverse button.
Indicator - Displays the current State of each input.
Fig 119
Fig 120
Fig 121
Fig 122