User's Manual

– 69 – AtlasIED.com
Specifications are subject to change without notice.
User Guide BlueBridge Designer II
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: [phone] • Fax: [phone]
Priority Selector - Multiple channel input, single output. Output is the input On channel with highest Priority (First-Tenth) channel above
the Threshold (-60dB to 0dB) value when Threshold Enable is activated. Output Mute and Hold Time (10ms to 30s) are included as well
as Signal, (above threshold) and Channel Selected indicators.
Summer - Summed multiple input channel audio is released as single channel output.
Signals
Gain - Signal level control, Gain (-100dB to +15, 0.1dB steps). This is used to raise or lower the signal level.
Mute - Channel Mute. This completely nullifies the signal in order to eliminate all audio.
Polarity - The Polarity module is used in order to reverse the phase of the signal.
Fig 131
Fig 132
Fig 133
Fig 134