User's Manual

AtlasIED.com – 72 –
Specifications are subject to change without notice.
User GuideBlueBridge Designer II
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: [phone] • Fax: [phone]
Logic Output - The logic output module is the final destination of the logic signal from where you can decide to either trigger the
internal physical relays, or trigger presets 1 through 8. Each relay has a normally open (NO) contact, a normally closed (NC) contact.
When a HIGH signal reaches the Relay contact in the Logic Output Module, both the NO and NC physical contacts will invert, either
closing the external circuit (NO) or opening it (NC). Open the Logic Output module to find that the output relays can be enabled /
disabled or inverted if need be. The Preset Trigger feature is simple in functionality. Send a HIGH signal to the desired channel in order
to recall the corresponding preset.
Component Libraries - The component library is the BlueBridge Designer database for all hardware, DSP, Logic, and Control modules.
To add any component that suits your design, simply click, hold and drag the desired module in to the work area.
Fig 140
Fig 141