User's Manual

– 73 – AtlasIED.com
Specifications are subject to change without notice.
User Guide BlueBridge Designer II
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: [phone] • Fax: [phone]
Wiring - Modules are wired together when you click, hold and drag from the output connection node of one module to the input node
of another. A logic signal will be displayed as a RED wire in order to differentiate from entangled audio wires that may be present.
Depending on the modules being wired, you can link multiple wires to single nodes. This will send the signal through both wires
simultaneously as a parallel connection. In figure 4 , notice that the input signal is being routed to the Logic Controlled Mute as well as
Relay 1. One practical use for this configuration is having an external LED light up when the emergency mute button is active.
Fig 142
Fig 143