Brochure

AtlasSound.com
1/2
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: [phone]
FAX [phone]
©2014 Atlas Sound L.P. All rights reserved. Atlas Sound is a trademark of Atlas Sound L.P. All other trademarks are the property of their respective owners. ATS004801 RevA 2/14
Networkable 2-Channel Power Amplier with DSP
DPA-102PM
Features
• 2 x 100 Watt Class-D Amplifier Technology
• DSP Signal Processing, Fully Configurable
• Ethernet Network Connectivity
• iOS App & Web Browser Control
• 1W Standby, Meets Energy Star Standard
• Remote Monitoring of Status & Levels
• Network Auto-Discovery Software
• Pole Mounted Projector Featuring Through Chassis or
Side Pole Mount
• Audio Sense Turn-On/Off
• Balanced and Unbalanced Inputs
• Assignable Level Controls (Security Protected)
Applications
The Atlas Sound DPA-102PM two channel compact amplifier features a
combination of flexibility, performance and control to provide high value
features for applications that require more than just great sound. The
web enabled DPA-102PM has an assortment of DSP tools including level
controls, EQ’s, limiters, high & low pass filters, delays and summing to
provide flexibility for a range of applications.
To make the DPA-102PM a “game changer” the advantages of on board
DSP are combined with an integral web server allowing remote control of
DSP functions and levels as well as output level and status monitoring of
any DPA amplifier on the network.
The DPA-102PM is “ready to use, out of the box” with no configuration
or network connectivity required and is a cost effective solution even in
applications that do not require processing or network control.
Specifications
Power Output 50 Watts per Channel @ 8Ω
100 Watts per Channel @ 4Ω
Factory Ship Settings Two CH 4Ω
Front Panel Levels Active
DSP Set to Flat & 0dB
THD 0.2% at Rated Output
Frequency Response: -3dB 20Hz @ 20kHz (DSP Filters Engaged)
DSP Elements Input Level, Output Level, Output Limiter,
5 Band Parametric EQ per channel, Hi & Lo
Cut Filters, Delay 60mS per channel, Matrix
mixer
GUI Control Ethernet Base, On Board Web
(No PC Software for Single Unit Monitoring
or Configuration)
Audio Power Down (APD) On Trigger Threshold: 5mV
Off, No Signal Sense, 30min
Level Control (Assignable) Front Panel (Removable Knobs and
Security Cover)
GUI Control (PC, IPhone, Android,
Password Protected)
Remote Wired (10K Ohm Based, Separate
Return per CH)
Protection Circuits Thermal, Short, Limiter
Signal to Noise Ratio: -100dB Below Rated Output (A-weighted)
Input Sensitivity: Unbalanced - 750mV RCA
Balanced - 750mV Euro Block PHX Type 3.5mm
Input Impedance: Unbalanced: 10kΩ
Balanced: 20kΩ
Output Terminals Euro Block PHX Type 5.08mm
Power Required: 100VAC – 240VAC, 50/60Hz
Power Consumption: • Standby Mode (Ethernet Active): 1 Watts,
22mA, 3.14 BTU
• Idle Active: 12.5 Watts, 173mA, 41 BTU
• Average Power: 4Ω (Audio Signal,
1⁄3 Power), 116 Watts, 395 BTU
• Max Power: 4Ω (Audio Signal, Peak),
384 Watts, 4.9A, 1310 BTU
Height: 1.75" (45mm)
Width: 8.5" (216mm)
Depth: 13.5" (343mm)
Weight: 4.9lbs (2.2Kg) Unit Only
Optional Accessories • DPA IP Discovery Software
• DPA Global Monitoring Software
• AA-YSUM: Passive Summing of
Stereo Signal
• WPD-VC10K: Potentiometer on Wall Plate
for Remote Level Control
• Rack Mount Kit: PA702-RMK