User's Manual

Owner’s Manual
MWRCVR
Wireless Receiver
AtlasIED.com – 10 –
Specifications are subject to change without notice.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: [phone] • Fax: [phone]
System
Frequency Range UHF 566 - 585.8MHz
Switching Bandwidth 25MHz
Switchable Frequencies 100
Channels 1
Display Screen LCD
Operating Range 100m Direct Sight
Output Impedance Mic / Line
Oscillation Type PLL Synthesized
Frequency Stability ±0.005%
Receiving Method True Diversity
Sensitivity -95dBm
Synchronization 2-Way
Image Rejection > 85dB
S/N Ratio > 110dB
Peak (Maximum) Deviation ±40KHz
T.H.D. < 0.5%
Antenna Socket BNC type
Audio Outputs Line (Balanced) XLR Jack: +10dBm(2.4V) / 5KΩ
Line (Unbalanced) 6.35mm Jack: +4dBm(1.2V) / 5KΩ
Mic (Balanced) XLR Jack: -18dBm(100mV) / 600Ω
Mic (Unbalanced) 6.35mm Jack: -24dBm(50mV) / 600Ω
Squelch RF / Noise / Pilotone Squelch
Power Supply 100-240V AC, 12V DC/1.6A
Mechanicals
Dimensions 7.87" x 5.91" x 1.73" (200mm x 150mm x 44mm)
Weight 1.39 lbs / 0.63 kg
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference
received, including interference that may cause undesired operation.
THIS DEVICE COMPLIES WITH PART 15C OF THE FCC RULES. This equipment complies with FCC RF
radiation exposure limits set forth for an uncontrolled environment.