User's Manual

Owner’s Manual
MWRCVR
Wireless Receiver
AtlasIED.com – 7 –
Specifications are subject to change without notice.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: [phone] • Fax: [phone]
Audio Output Connection
Balanced Output: XLR connector provides balanced audio output signal from this jack to the
mixer/amplifier. Use an audio output cable with “XLR” or “Cannon” connector, connect one end to
the balanced output jack of the receiver, and the other end to the “LINE IN” or “MIC IN” jack of the
mixer/amplifier.
Level Switch Setting: When connecting to the LINE/AUX IN of a mixer/amplifier, switch to “LINE”
position (Fig 16). DO NOT use the “MIC” position as they may not deliver a sufficient output level.
When connecting to the “MIC IN” jack of a mixer/amplifier, switch to “MIC” position (Fig 17).
Distortion may occur at the wrong level position.
Figure 16 Figure 17