User's Manual

Owner’s Manual
MWRCVR
Wireless Receiver
AtlasIED.com – 8 –
Specifications are subject to change without notice.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: [phone] • Fax: [phone]
Audio Output Connection
Unbalanced Output:
1
⁄4" line output connector provides unbalanced audio output signal from this jack
to the mixer/amplifier. Use an audio output cable with
1
⁄4" PHONE PLUG connector. Connect one end
from the unbalanced output jack of the receiver, and the other end to the “LINE IN” or “MIC IN” jack
of the mixer/amplifier.
Level Switch Setting: When connecting to the LINE/AUX IN of a mixer/amplifier, switch to “LINE”
position (Fig 18). DO NOT use the “MIC” position as they may not deliver a sufficient output level.
When connecting to the “MIC IN” jack of a mixer/amplifier, switch to “MIC” position (Fig 19).
Distortion may occur at the wrong level position.
Figure 18 Figure 19