User's Manual

Owner’s Manual
MWRCVR
Wireless Receiver
AtlasIED.com – 6 –
Specifications are subject to change without notice.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: [phone] • Fax: [phone]
Adjusting Volume Level
1. Volume adjustment can be made from the home screen (Fig 12).
2. Press UP or DOWN button to choose a new level (Fig 13).
3. After the level is adjusted, wait 5 seconds to store the setting.
Adjusting Squelch Level
When interference is encountered try reducing the sensitivity of the receiver, thus less susceptible to
interference.
1. Press and release SET button until the SQUELCH SETUP page appears (Fig 14).
2. Press UP or DOWN button to choose a new level between 1 and 10 (Fig 15).
3. After the level is adjusted, wait 5 seconds to store the setting.
Since increasing the squelch level will also reduce the reception distance, it’s recommended to
choose the lowest level that can eliminate the interference. If this still does not solve the problem
it means this frequency is not suitable. Adjust the squelch back to its preset level and use the scan
function to locate a clear, interference-free channel.
Figure 14
Figure 13
Figure 15
Figure 12