User Guide

Specifications are subject to change without notice
AtlasSound.com
1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. • TELEPHONE: [phone] • FAX: [phone]
©2006 ATLAS SOUND LP Printed in U.S.A. 00106 ATS002264 RevA 01/06 PP
OWNER'S MANUAL
PA601 COMMERCIAL AMPLIFIER
6
FRONT PANEL DESCRIPTION
1. Power Switch
This push on/off switch supplies power to the PA601 amplifi er.
2. Power LED
This LED illuminates when the power switch is turned on.
3. Peak LED Indicator
The Peak LED will illuminate if the PA601 inputs are being over driven or when the input gain controls
are turned up too high. Check that the proper signal level is being fed into the inputs and/or turn the
input gain down until the LED is turned off.
4. Signal LED
When the Signal LED illuminates, this indicates that input signals connected to the amplifi er are
capable of driving the PA601 to full power.
5. Input 1 Gain
Input 1 rotary control varies the amplitude of the signal fed into the amplifi er. Turn clockwise to increase
and counter-clockwise to decrease the signal level.
F7,&'7cfb_\_[h
Power
On
Off
Signal PowerPeak
Master


5
1
2
3
4