User Manual

– 9 – AtlasSound.com
Specifications are subject to change without notice.
Owner’s Manual
PA40G / PA60G
Commercial Amplifier
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: [phone] • Fax: [phone]
Specifications
Power Output: PA40G = 40W @ 70.7V (125Ω), 40W @100V (250Ω)
PA60G = 60W @ 70.7V (83Ω), 60W @ 100V (166Ω)
Frequency Response: 50Hz - 20kHz
THD+N: .5% or Less @ 1kHz, Rated Output
Sensitivity: Line Input 500mv (600Ω)
Inputs 2/3 RCA 500mv (10kΩ)
Output Regulation: Less Than 2dB, No Load To Full Load
Signal to Noise Ratio: Balanced Input = >55dB
Unbalanced RCA Summed = >55dB
Indicators: Power, Signal, Limit
Power Consumption:
PA40G: Idle: 0.075A, 8W, 27 BTU
Average: 0.26A, 24W, 81 BTU
Max: 0.8A, 71W, 242 BTU
PA60G: Idle: 0.075A, 8W, 27 BTU
Average: 0.41A, 34W, 116 BTU
Max: 1.25A, 102W, 348 BTU
Height: 1 RU, 1.75" (44mm)
Width: 8.5" (216mm)
Depth: 7.81" (198mm)
Weight: MA40G: Net Weight = 2.9lbs. (1.32kg), Shipping Weight = 3.1lbs. (1.4kg)
MA60G: Net Weight = 2.9lbs. (1.32kg), Shipping Weight = 3.1lbs. (1.4kg)
Fuse: PA40G = T630mA
PA60G = T1A
NOTE: Average power consumption is based on one third (1/3) of the maximum power rating, 50%
duty cycle.