Owner’s Manual TSD-DA13 1x3 Distribution Amplifier TSD-DA13 1x3 Distribution Amplifier 1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A. Telephone: 800.876.3333 • Fax: 800.765.3435 –1– Specifications are subject to change without notice. AtlasSound.
TSD-DA13 1x3 Distribution Amplifier Owner’s Manual Description The Atlas Sound TSD-DA13 1x3 distribution amplifier is designed to provide clean, isolated signal distribution locally or to remote locations. The unit allows a balanced mic or line level source to be distributed to three isolated variable outputs making it a perfect solution for applications including convention centers, houses of worship, restaurants/sports bars and industrial facilities.
TSD-DA13 1x3 Distribution Amplifier Owner’s Manual Front Panel Description 6 6 4 5 3 6 6 1 2 1. Input Level Control - Adjusts the gain of the source audio signal that is applied to the DA13 circuitry. Turn clockwise to increase the signal level and counter-clockwise to decrease it. Note: The Input Level Control knob can be removed and replaced with a supplied security cover to prevent unauthorized adjustment. 2.
TSD-DA13 1x3 Distribution Amplifier Owner’s Manual Rear Panel Description 5 5 4 5 5 1 2 3 TSD Input/Output connections are removable for easy system wiring. The connector has a 3.5mm pitch between pins. 1. DC Power Input - Each TSD that requires DC power comes with a 2 position connector for an external 24VDC power supply (sold separately). Because of the TSD’s low power consumption, a single external power supply may power more than one TSD.
TSD-DA13 1x3 Distribution Amplifier Owner’s Manual Dip Switch Function Identification SWITCH FUNCTIONS Switch Position • DIP SW # 1 - 24VDC Phantom Power applies power to the input terminal for condenser mic operation. Down position is On. • DIP SW # 2 - Input Mic or Line Select for input gain selection. Up position is Line, down position is Microphone. • DIP SW # 3 - Input Low Cut Filter engages at a roll off rate of 12dB per octave. This filter operates either in the Line or Mic mode.
TSD-DA13 1x3 Distribution Amplifier Owner’s Manual Block Diagram DIP SWITCH FUNCTION SET MIC/LINE 1 2 3 PHANTOM INPUT 125Hz/12dB LOW CUT OFF LINE OFF LINE LINE LINE ON MIC ON MIC MIC MIC 4 5 6 + – OUTPUT 1 G OUTPUT 1 OUTPUT 2 OUTPUT 3 1 MIC/LINE 2 3 4 5 6 OUTPUT 1 LEVEL ON FRONT PANEL LOW CUT 125Hz -3db MIC/LINE INPUT LEVEL ON FRONT PANEL SIGNAL + – OUTPUT 2 G OUTPUT 2 LEVEL ON FRONT PANEL PEAK R MIC/LINE RCA + – OUTPUT 3 G L OUTPUT 3 LEVEL ON FRONT PANEL 24V DC 24V
TSD-DA13 1x3 Distribution Amplifier Owner’s Manual Mic Input Level Outputs Type Connection Impedance Line Output Level Mic Input vs Output Level Controls Input Level Control Output Level Control Dip Switch Function Indicators Output Signal Output Peak Power Electrical Frequency Response THD Signal to Noise 46dB Gain 10mV (-40dBV) Balanced = 2V (+6dBV) Balanced Output, Maximum Input 40mV (-27dBV) Qty 3, Balanced Mic or Line Selectable Removable 3 Position Captive Screw 3.
TSD-DA13 1x3 Distribution Amplifier Owner’s Manual Limited Warranty All products manufactured by Atlas Sound are warranted to the original dealer/installer, industrial or commercial purchaser to be free from defects in material and workmanship and to be in compliance with our published specifications, if any.
