Owner’s Manual TSD-SEQ6 Sequencer Controller TSD-SEQ6 Sequencer Controller 1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A. Telephone: 800.876.3333 • Fax: 800.765.3435 –1– Specifications are subject to change without notice. AtlasSound.
TSD-SEQ6 Sequencer Controller Owner’s Manual Description The Atlas Sound TSD-SEQ6 Sequencer Controller features 6 outputs that are configurable individually to be either a 24VDC output or Hard Switch Contact Closure (CC). There are two separate output sequence time delay trimmers ranging from 1 second to 6 minutes. Activation can be done via the front panel or remotely via Hard Switch CC, Momentary Switch or DC Voltage.
TSD-SEQ6 Sequencer Controller Owner’s Manual Front Panel Description 6 6 2 3 6 6 4 5 1 1. System Activation Switch - Press to activate the ON or OFF sequence. 2. System Activation Switch Security Cover - If you do not want to use the Front Panel Activation Switch, place the security cover over the switch and secure using the retainer screw. 3. Power LED - Illuminates Blue when 24VDC power is present. 4.
TSD-SEQ6 Sequencer Controller Owner’s Manual Rear Panel Description 11 11 2 11 11 1 3 4 5 6 7 8 9 10 TSD Input/Output connections are removable for easy system wiring. The connectors have a 3.5mm pitch between pins. 1. DC Power Input - Each TSD that requires DC power comes with a 2 position connector for an external 24VDC power supply (sold separately). Because of the TSD’s low power consumption, a single external power supply may power more than one TSD.
TSD-SEQ6 Sequencer Controller Owner’s Manual 8. EPD “Emergency Power Down” Port - When an urgent system shut down is required, short the two pins together and the sequence portion will be bypassed and turn Off all outputs at the same time. This EPD feature is commonly used with fire control systems. 9. Delay Pot for Sequence 1 Output - The time between Sequence 1 Output and Sequence 2 Output can be set by rotating the pot following the indicators on the panel.
TSD-SEQ6 Sequencer Controller Owner’s Manual Specifications Description Sequence Controller Chassis Color Chassis Material Black Aluminum Outputs Type Connection Qty 6, Sequenced Channel Output, Selectable 24VDC or CC Removable 3 Position Captive Screw 3.5mm Spacing Type Connection Qty 1, Link Input/Output Removable 3 Position Captive Screw 3.5mm Spacing Type Connection Qty 1, Output 24VDC for Remote Panel LED Indicator Removable 2 Position Captive Screw 3.
TSD-SEQ6 Sequencer Controller Owner’s Manual Power Requirements Voltage Power Consumption Current Power Consumption VA Watts 24VDC, 500mA 100mA 2.4W Dimensions H 1.5" (39mm) x W 4" (101mm) x D 2.75" (70mm) Weight 6oz, .165kg Accessories TSD 24VDC Power Supplies TSD-RMK 1 RU Rack Panel Safety and Certifications External Power Supply cUL, CE, RoHS, TUV 1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A. Telephone: 800.876.3333 • Fax: 800.765.
TSD-SEQ6 Sequencer Controller Owner’s Manual Limited Warranty All products manufactured by Atlas Sound are warranted to the original dealer/installer, industrial or commercial purchaser to be free from defects in material and workmanship and to be in compliance with our published specifications, if any.
