Information Sheet

ManualsBrandsAtlas ManualsElectronics8" Coaxial Speaker System with Transformer and 8Ω Bypass (Pair | White)

AtlasSound.com

2/5

1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: (800) 876-3333

FAX (800) 765-3435

Mounting Accessories

Mounting is simplified with Strategy Series

style “dog leg” tabs that

allow easy installation into drop tile or drywall ceilings with provided tile

bridge assembly. The tile bridge consists of two “V” shaped mounting

rails and a C-Ring assembly. The C-Ring can be attached to the rails with

the screws provided to extend support to the T-Bar grid in suspended

ceiling applications. Multiple hole locations are provided to allow the

C-Ring to be positioned to the outer edge of the tile if necessary.

For existing drywall applications, the tile bridge, C-Ring, and support rails

can be inserted into the hole cut for the FAP82T. For easy positioning the

“V” shaped support rails match the shape of the C-Ring tabs for easy

maneuvering and location when working “blindly” above the deck. A

uniquely designed “easy access” input panel on the side of the enclosure

allows conduit runs using flexible or rigid conduit. Below this cover

resides a detachable Phoenix style locking four-pole Euro connector.

The package includes an attractive press-fit grille, which nicely matches

contemporary architecture.

For new construction drywall ceiling applications, the optional FAP82-TR

trim ring is available. This unit provides a marked location for drywall

installers to cut around essentially reserving the desired location in the

ceiling until final installation of FAP82T. Mounting holes are provided to

accommodate 16" or 24" OC stud / joist mounting.

With the FAP82T, Atlas Sound has addressed pendulum mounting for

open ceiling applications. An eyebolt assembly is included with the

package allowing suspension of the FAP82T with load rated cable or

“all thread”. The enclosure is finished white to match the bezel ring for

better blend in open ceiling applications. Please note that the enclosure

/ bezel ring may also be painted to accommodate custom finishes when

required.

Speaker systems suspended overhead pose a risk of serious injury

or death if they fall. Overhead suspension of any object (rigging) is

inherently dangerous. It poses a substantial risk of injury or death to

both those persons performing the installation and those persons who

may later occupy the space under the suspended objects. You may be

held liable for any injury or damages which may be alleged to result from

improper installation.

If you are not experienced in rigging or suspension of speaker systems,

or if you have any doubt that you are qualified to install suspended

speaker systems, do not proceed. Instead, obtain the services of properly

qualified personnel to complete the installation.

Never suspend the speaker system by any attachment except the

provided suspension point. The eyebolt can also be used with an auxiliary

support cable in drop tile installations. It Is recommended that this

secondary support be utilized in drop ceilings for safety and seismic

considerations.

C-Ring / V-Rails

FAP82-TR