User Manual

AtlasSound.com – 9 –
Specifications are subject to change without notice.
Owner’s Manual
AM1200
Sound Masking System
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: [phone] • Fax: [phone]
11. Hanger Bracket – There are two hanger brackets included with the AM1200. These
can be used to suspend the unit from a simple point.
Ceiling Truss
or Beam
Ceiling
Cable Legth
Dependent
on Install
The above illustration shows you how to mount the AM1200 to a open or Plentum ceiling.
We suggest suspending the unit via a cable to the enclosed AM1200 hanging brackets. The
cable must be secured enough to handle 5 times the weight of the unit. Note: The location
of ceiling of which you want to secure the AM1200 must meet your local building codes.
Contact your local building inspector prior to installation. Placement of the AM1200 must be
within 6 ft of an approved electrical outlet that meets the local electrical codes.
It is important to secure the power cord to the chassis. To do so, make a loop in the power
cord making sure there is no stress on the mating connectors and secure the power supply
cable to the chassis support tab via the a cable tie. See Picture above for an example.
Power Cord
Attaches to
Chassis
Cable Length
Dependent
On Install
Ceiling
Ceiling Truss
or Beam
Hanging
Bracket