User Manual

Owner’s Manual
CP400 & CP700
Commercial Power Amplifier
AtlasSound.com – 2 –
Specifications are subject to change without notice.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: [phone] • Fax: [phone]
TABLE OF CONTENTS
Introduction ..........................................................................................................3
Features ...............................................................................................................3
Applications ..........................................................................................................3
Front Panel Description ........................................................................................4
Rear Panel Description .........................................................................................5
Input Wiring ..........................................................................................................7
Speaker Output Wiring .........................................................................................9
Specifications .......................................................................................................15
Warranty ...............................................................................................................16
SAFETY INSTRUCTIONS
Please Read Carefully Before Installing or Operating This Product
• Read instructions fully.
• Pay attention to any and all warnings.
• Connect this amplier only to the correct operating voltage.
• Do not attempt to service this unit. Only a qualied service technician should open this unit for
servicing.
• Warning: To reduce the risk of re or electric shock, do not expose this appliance to rain or
moisture.
HEARING DAMAGE!
All professional loudspeaker systems are easily capable of producing very high sound pressure
levels. Use care with the operation of this amplier and wear the appropriate hearing protection.
Exposure to excessive sound pressure levels can cause permanent hearing damage.
SHOCK HAZARD!
The Atlas Sound CP400 and CP700, when in operation, can produce a shock hazard at the speaker
terminals. Make sure the amplier is turned off when installing or removing connections at the
speaker terminal barrier strip. After connecting the proper speaker load, REPLACE the terminal
strip cover!
VENTILATION
Although the CP400 and CP700 are internally fan cooled and have thermal protection circuitry,
adequate ventilation is required to ensure trouble-free operation. When rack mounting one or
more of the Atlas Sound CP Series power ampliers, install an exhaust fan in the rack to evacuate
heat buildup. Consult Atlas Sound’s Technical Support at 1-800-876-3333 for advice on thermal
management and assistance with rack selection for this product.
RACK MOUNTING
Although the internal output transformers are mounted close to the front panel, when rack
mounting the CP400 and CP700, be sure the unit has adequate front and rear support.