User Manual

1/1
AtlasSound.com
TELEPHONE: [phone]
FAX [phone]
©2012 Atlas Sound L.P. All rights reserved. Atlas Sound is a trademark of Atlas Sound L.P. All other trademarks are the property of their respective owners. All specs are subject to change without notice. ATS004348 RevA 5/12
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
CP700RRK
CP700 Rear Rack Rail Kit
A
B
Step 1:
Install the amplifier into the cabinet and then snap the side rails
over the back of the amplifier.
Note: (If the amplifier is being installed in an 18
1
⁄2" Deep Cabinet,
the side rails will have to be shortened by removing the perforated
sections.
Step 2:
Slide the lacing bar through the slots at the back of the side rail.
DETAIL A
SCALE 1:3
Step 3:
Position the lacing bar, use the
1
⁄4" screws for the lacing bar and the
1
⁄2"
screws for the rear rails.
DETAIL B
SCALE 1:5