Instructions / Assembly

1
PACKAGE CONTENTS
Unpack your fan and check the contents. You
should have the following items:
a. Hanger bracket assembly
b. Ball / down rod assembly
c. Fan motor assembly
d. Metal blade with cage (decorative* or
safety**) or Wood blade
e. Receiver with 6 wire nuts
f. Transmitter+holder+2 mounting screws
g. Allen wrench
h. Package hardware
1) Mounting hardware:
wood screws (2), screws (2),
lock washers (2), washers (2),
star washers (2), wire nuts (3)
Philips screw driver
Standard, flat-head screw driver
11 mm wrench
Step ladder
Wire cutters
a
b
c
e
f
g
h
TOOLS AND MATERIALS
REQUIRED
d-i
d-ii
d-iii
*If blade is metal and accompanied by safety
cage (see Diagram d-i): To reduce the risk of
injury to persons, install fan so that blade are
at least 7.0 Ft. above the floor in the US and
8.3 Ft./2.5 M above the floor in Canada.
**If blade is metal and accompanied by
decorative cage (See Diagram d-ii) or
unguarded wooden blade (See Diagram d-iii):
To reduce the risk of injury to persons, install
fan so that blade is at least 10.0 Ft. above the
floor in the US and 10.0 Ft./3.05 M above the
floor in Canada.