Owner’s Manual DSP2210 & DSP2212 Digital Processor and Amplifier DSP2210 & DSP2212 1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A. Telephone: 800.876.3333 • Fax: 800.765.3435 –1– Specifications are subject to change without notice. AtlasSound.
ier 35 d 35W ngineered und HINA DSP2210 & DSP2212 Digital Processor and Amplifier Owner’s Manual Table of Contents Important Safety Instructions..........................................................................................................................................2 Introduction ......................................................................................................................................................................4 System Overview Flow Diagram...............
DSP2210 & DSP2212 Owner’s Manual Digital Processor and Amplifier CAUTION – When Installing the Product • Plugging in or unplugging the power cord with wet hands may result in electric shock. • Never move the device with the power cord plugged into the wall, as damage to the power cord may result. • When unplugging the cord from the wall, grasp the plug, NOT the cord.
DSP2210 & DSP2212 Digital Processor and Amplifier Owner’s Manual Introduction The Atlas Sound DSP2210/DSP2212 digital processor “Privacy” system is a self contained, compact multi-zone digital DSP-GUI controlled processor and digital amplifier capable of simultaneous distribution of masking, paging, and background music signals for use in Industrial, Institutional, Commercial and Government facilities.
DSP2210 & DSP2212 Owner’s Manual Digital Processor and Amplifier SYSTEM OVERVIEW – SIGNAL FLOW DIAGRAM DSP2212 Functional Limiter Mic Bass-Treble Para - EQ A-D Music L Mix Music R Zone Amp 1 High Pass D-A Mixer 1 Music Mono A-D 70V Line 1 Bass-Treble Graphic EQ Noise Filter Zone Amp 2 High Pass D-A Mixer 2 Graphic EQ 70V Line 2 DSP Block SMS Lynx AVIO Core DSP Processor USB Phy SMS SMS Lynx AVIO Core I/O Processor Mic CC Rotary Encoder SMS Lynx AVIO Core Interface Processor
DSP2210 & DSP2212 Digital Processor and Amplifier Owner’s Manual SYSTEM VIEWS DSP2210 FRONT PANEL DSP2210 REAR PANEL DSP2212 FRONT PANEL Amp Status Clip 1 2 Fault 1 2 USB Control Port Function Adjust DSP2212 DSP2212 REAR PANEL 1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A. Telephone: 800.876.3333 • Fax: 800.765.3435 AtlasSound.com –6– Specifications are subject to change without notice.
Owner’s Manual DSP2210 & DSP2212 Digital Processor and Amplifier INSTALLATION COMPUTER NETWORK TERMINATION (DSP2212 only) DSP2210/12 NOTE: All ‘RJ45’ Network connections must be wired to meet EIA/TIA 568B standard. 1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A. Telephone: 800.876.3333 • Fax: 800.765.3435 –7– Specifications are subject to change without notice. AtlasSound.
DSP2210 & DSP2212 Digital Processor and Amplifier Owner’s Manual 70V SPEAKER TERMINATION Phoenix connectors are used and are keyed or polarized to fit one way, do not force fit these connectors and follow these basic instructions; • Do NOT force fit the connectors – they are polarized to fit in one direction • Follow the +/- wiring polarity for all speakers • Use only 70V speakers • Ensure that total speaker wattage taps per channel does NOT EXCEED 80% of the rated output 25W RMS per zone.
DSP2210 & DSP2212 Owner’s Manual Digital Processor and Amplifier PAGING MICROPHONE INPUT TERMINATION DSP2210/12 REAR PANEL BACKGROUND MUSIC AND LINE INPUT TERMINATION DSP2210/12 REAR PANEL MOUNTING DSP2210/DSP2212 unit is designed to mount into standard EIA cabinets, free standing racks, or consoles using the (x4) front slots. NOTE: Allow a minimum one (1) rack space above and below (at 3.5") between DSP2210/DSP2212 and any other electronic equipment to insure proper thermal ventilation.
DSP2210 & DSP2212 Digital Processor and Amplifier Owner’s Manual SYSTEM OVERVIEW – SYSTEM HARDWARE / SOFTWARE REQUIREMENTS The DSP2210/DSP2212 unit has the following hardware and software computer requirements; • Microsoft® Windows® Operating system shall be: XP Professional, Windows® Vista, Windows® 7 or better • 50MB of available hard disk space • 512MB of RAM of higher • A network connection with a minimum data transfer rate of 10Mbps or higher (100Mbps is recommended) DISCOVER UNITS Select th
Owner’s Manual DSP2210 & DSP2212 Digital Processor and Amplifier Select the Unit and click the “Connect to this unit” button The Software should now be able to access and control the unit – eg. Select GEQ 1 As controls are selected, the various functions/settings will appear in the screen below the system functional map for review/adjustment. 1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A. Telephone: 800.876.3333 • Fax: 800.765.3435 – 11 – Specifications are subject to change without notice.
DSP2210 & DSP2212 Digital Processor and Amplifier Owner’s Manual PAGE PLANS Select Page Plans Button Turn on the “Zones” to be active during Telco 00 (Mic Input) Page, (and Network Pages – DSP-2212 only) NOISE RAMP Select Noise Ramp Button – “On” ramps the noise level 1dB every 10 seconds to its previous level after power up. 1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A. Telephone: 800.876.3333 • Fax: 800.765.3435 AtlasSound.com – 12 – Specifications are subject to change without notice.
Owner’s Manual DSP2210 & DSP2212 Digital Processor and Amplifier CONNECTING TO THE LAN (DSP2212 only) Connect both the Computer running the Application Software and the unit RJ45 ports to the LAN ports on the Ethernet Router with DHCP Server Select the “Settings” screen from the Menu Click “Discover Units” The software should find all available units on the network similar to the following screen Select the unit you wish to control and click the “Connect to this unit” button The Software should now be
DSP2210 & DSP2212 Digital Processor and Amplifier Owner’s Manual SPECIFICATIONS SYSTEM PERFORMANCE / DSP PROCESSORS • Dynamic range >102dB A-weighted • Frequency response 80Hz – 20kHz ± 3dB at rated output • Distortion THD+N .
DSP2210 & DSP2212 Owner’s Manual Digital Processor and Amplifier SYSTEM AMPLIFIERS (x2) • Frequency response 80Hz – 20kHz, ± 3dB • Total distortion .001% typical at +4dB, 1kHz, 0dB gain • Transformer output 70.7V • Efficiency 85% or better • Gain control adjustable to 34dB • Power supply UL / CUL recognized • Input impedance 50kΩ • Carrier frequency 400kHz • Peak current 1.
DSP2210 & DSP2212 Digital Processor and Amplifier Owner’s Manual Limited Warranty All products manufactured by Atlas Sound are warranted to the original dealer/installer, industrial or commercial purchaser to be free from defects in material and workmanship and to be in compliance with our published specifications, if any.