Installation Guide

6
B. Wall mount remote control
a. Fan wire connection
1. Connect the fan supply (black) wire to the black
household supply wire. (Fig. 7)
2. Connect the neutral fan (white) wire to the white
neutral household wire.
3. Connect the fan ground wire (green) to the
household ground wire.
4. Check that the two plugs, large and small are making
proper contact. One plug is small with only a single
wire connection. The second plug is larger and
connects multiple colored wires.
5. After all connections are made, check to make sure
there are no loose strands. As an additional precaution
we suggest to secure the plastic wire connectors to the
wires with electrical tape.
b. Installing the wall control
1. Remove the existing wall plate and the old switch
from the wall outlet box. Wire nut the BLACK leads
(hot) together and push back inside the outlet box.
2. Carefully tuck the wire connections inside the outlet
box. Secure the wall control with the two wall switch
screws provided. (Fig. 8)
3. Attach the wall plate over the wall control and secure
with the two wall plate screws provided.
Disclaimer: If a wall switch is to be used, for warranty
to be valid, our included wall control needs to be
installed to operate this fan.
Figure 7
Figure 8
SUPPLY CIRCUIT
BLACK
Ground
Conductor
Ceiling
Outlet Box
Ground to
Downrod
GREEN
WHITE WHITE
BLACK