Owner’s Manual MMK15-RM MMK17-RM 15" / 17" Single Rail Console MMK15-RM / MMK17-RM 15" / 17" LCD Single Rail Console with Modular KVM Switch 1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A. Telephone: 800.876.3333 • Fax: 800.765.3435 –1– Specifications are subject to change without notice. AtlasSound.
MMK15-RM MMK17-RM Owner’s Manual 15" / 17" Single Rail Console Packing List The complete 15" / 17" single rail console with modular KVM switch package consists of: • One 1RU 19" Rack Mount Console • Two Rails with Front and Rear Bracket • Two Extended Brackets. (See Below) • Two Short Brackets. (See Below) • Two Bracket Attachments. (See Below) • One 5.9' (1.8 m) KVM cable.
er 35 35W gineered und INA MMK15-RM MMK17-RM Owner’s Manual 15" / 17" Single Rail Console Safety Instructions The lightning flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage “ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION ´ RISQUE DE DECHARGE ELECTRIQUE -NE PAS OUVRIR.
MMK15-RM MMK17-RM 15" / 17" Single Rail Console Owner’s Manual CAUTION – When Installing the Product • Plugging in or unplugging the power cord with wet hands may result in electric shock. • ever move the unit with the power cord plugged into the wall, as damage to the power cord may N result. • When unplugging the cord from the wall, grasp the plug, NOT the cord.
Owner’s Manual MMK15-RM MMK17-RM 15" / 17" Single Rail Console Table of Contents Packing List..................................................................... 2 3. Installation........................................................................ 14 3.1 Safety Instructions......................................................... 3 Install 15" Single Rail Console into Cabinet......14 3.1.1 Notes................................................................14 3.1.
MMK15-RM MMK17-RM 1. 15" / 17" Single Rail Console Owner’s Manual General Information Single rail consoles with modular KVM switch offer an industrial level input solution to optimize your space utilization by controlling your systems in just 1RU. 1.
MMK15-RM MMK17-RM Owner’s Manual 1.3 15" / 17" Single Rail Console Product Specification 1.3.1 15" / 17" Single Rail Console with Modular KVM Switch Specification Model name Model Name MMK15-RM MMK17-RM Number Of Ports 1 Dimension 18.5" x 17.6" x 1.7" (470.1mm x 447.5mm x 44mm) Package Dimension 23.9" x 21.7" x 9.0" (606mm x 551.5mm x 230mm) Net Weight 26.46 lbs / 12 Kg 28.7 lbs (13.0Kg) Gross Weight 43.0 lbs / 19.5 Kg 45.2 lbs (20.5Kg) Display Size 15" (381 mm) 17" (431.
14.89" (378.2 mm) AtlasSound.com ) ) 0.05" (1.2 mm) MMK17-RM 24.17" (614 mm) –8– Specifications are subject to change without notice. 18.98" (482 mm) 18.31" (465 mm) Figure 1-1. 15" / 17" Single Rail Console with Modular KVM Switch Dimensions 5.39" (137 mm) 1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A. Telephone: 800.876.3333 • Fax: 800.765.3435 14.89" (378.2 mm) MMK17-RM 1.25" (31.8 mm) 1.73" (44 mm) 1.25" (31.8 mm) 14.89" (378.2 mm) MMK17-RM 1.38" (35 mm) 1.38" (35 mm) MMK15-RM 1.
MMK15-RM MMK17-RM Owner’s Manual 15" / 17" Single Rail Console 2. Panel Controls and OSD Function Controls Description Soft power on/off button. Adjacent LED is lit when on. Auto Auto-synchronize and scale down display to any valid factory preset timings. Press to scroll the function you want to adjust. Press to scroll the function you want to adjust. Menu To access the main menu. This button also acts as the “Enter” button. Table 2-1. Panel Controls Figure 2-1.
MMK15-RM MMK17-RM 15" / 17" Single Rail Console Owner’s Manual 2.1 Auto Tune Press the “Auto Tune” button. The panel will adjust the display size automatically and also tune the panel for optimal viewing. 2.2 Input Source 1. Press the “Menu” button. 2. Use the “Down” and “Up” button to scroll. Auto Tune Input Source Brightness Contrast Color Position Language Recall Exit 3. Press the “Menu” button to enter, and you will see: VGA / DVI 4. Use the “Down” and “Up” buttons to select the input signal source.
MMK15-RM MMK17-RM Owner’s Manual 15" / 17" Single Rail Console 2.4 Contrast 1. Press the “Menu” button. 2. Use the “Down” and “Up” buttons to scroll. Auto Tune Input Source Brightness Contrast Color Position Language Recall Exit 3. Press the “Menu” button to enter. 4. Use the “Down” and “Up” buttons to adjust the display contras. 5. Press the “Menu” button to enter. 2.5 Color 1. Press the “Menu” button. 2. Use the “Down” and “Up” button to scroll.
MMK15-RM MMK17-RM 15" / 17" Single Rail Console Owner’s Manual 2.6 Position 1. Press the “Menu” button. 2. Use the “Down” and “Up” buttons to scroll. Auto Tune Input Source Brightness Contrast Color Position Language Recall Exit 3. Press the “Menu” button to enter. And you will see: Icon Description Image Pos To adjust the position of the image. OSD Pos To adjust the position of the OSD. Return To exit and return to the previous page Table 2-3. Icon Description 4.
MMK15-RM MMK17-RM Owner’s Manual 15" / 17" Single Rail Console 2.8 Recall 1. Press the “Menu” button. 2. Use the “Down” and “Up” buttons to scroll. Auto Tune Input Source Brightness Contrast Color Position Language Recall Exit 3. Press the “Menu” button to enter, and you will see: Yes / No 4. Select “Yes” button then “Menu” button to recall the factory setting. Select “No” to return to the previous page. 2.9 Exit 1. Press the “Exit” button to quit OSD menu. 2.
MMK15-RM MMK17-RM 15" / 17" Single Rail Console Owner’s Manual 3. Installation 3.1 Install 15" / 17" Single Rail Console Into Cabinet 3.1.1 Notes 1. P lease check all peripherals according the list before installation. To make sure that the unit was not damaged during shipping. If you encounter any problem, please contact Atlas Sound. 2. Before installation, make sure all peripherals and computer have been turned off. 3. T he cabinet depth range must be in between 19.84" – 39.38" (504mm – 1000mm).
Owner’s Manual MMK15-RM MMK17-RM 15" / 17" Single Rail Console 3.1.2 Hardware Kits Contents 1. T wo Rails with Front and Rear Brackets (Please Identify the Brackets. Right and Left Sides are Different.) 2. Two Extended Brackets 3. Two Short Brackets 4. Two Bracket Attachments 5. Six (6) Screws (Length = 0.24" (6 mm)) 6. Six (6) Screws 7. Two Keys 1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A. Telephone: 800.876.3333 • Fax: 800.765.
MMK15-RM MMK17-RM 15" / 17" Single Rail Console Owner’s Manual 3.1.3 Step A (Install Console): 1. Adjust rail until two screws appear. 2. Loosen (Not Remove) seven screws. 3. Adjust rail to fit your cabinet. 4. Install front and rear bracket on cabinet. 1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A. Telephone: 800.876.3333 • Fax: 800.765.3435 AtlasSound.com – 16 – Specifications are subject to change without notice.
Owner’s Manual MMK15-RM MMK17-RM 15" / 17" Single Rail Console 5. Tighten seven screws. 6. Repeat step 1-5 for the other side. 7. Push console into rails. (Be careful that the rear box is loose when removing the console from the carton.) 8. Unlock and pull rail-lock switch (left and right at the same time) then push console to the end. lock lock unlock unlock rail-lock switch 1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A. Telephone: 800.876.3333 • Fax: 800.765.
MMK15-RM MMK17-RM 15" / 17" Single Rail Console Owner’s Manual 9. Install three screws (Length = 0.24" / 6 mm) in rear of the console. (Both sides) 10. Finish installation as below. Rack mounting completed. 1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A. Telephone: 800.876.3333 • Fax: 800.765.3435 AtlasSound.com – 18 – Specifications are subject to change without notice.
MMK15-RM MMK17-RM Owner’s Manual 15" / 17" Single Rail Console 3.1.4 Step B (Replace Short Bracket): 1. Remove seven screws. 2. Take the two original brackets out. 3. Install short bracket to rear of the rail. 4. Install four screws (do not tighten) to combine rail, short bracket and bracket attachment. 5. Repeat step 1 - 4 for the other side. 6. Repeat step 3 - 10 of Step A to finish the installation. 1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A. Telephone: 800.876.3333 • Fax: 800.765.
MMK15-RM MMK17-RM 15" / 17" Single Rail Console Owner’s Manual 3.1.5 Step C (Replace Extended Bracket): 1. Loosen (Not Remove) seven screws. 2. Remove six screws. 3. Remove rear bracket. 4. A djust rail and input extended bracket to rear of the rail then adjust extended bracket to fit the cabinet. Install 2-3 screws (do not tighten) upon the length you need. One screw will not be used. 5. Repeat steps 1-4 for the other side. 6. Repeat steps 3-10 of step A to finish the installation.
MMK15-RM MMK17-RM Owner’s Manual 15" / 17" Single Rail Console 3.1.6 Unload Step 1. Make sure the console has locked and turned off. 2. Loosen two thumb screws and pull modular KVM switch out, if installed. 3. Release three screws in rear of the console. (Both Sides) 4. Unlock. 5. Pull console out until the console locks. 1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A. Telephone: 800.876.3333 • Fax: 800.765.3435 – 21 – Specifications are subject to change without notice. AtlasSound.
MMK15-RM MMK17-RM 15" / 17" Single Rail Console Owner’s Manual 6. Pull rail-release switch and pull console out. (Both sides) (Be careful when you pull out console.) 7. Push rail-lock switch on the rail and push rail back. (Both sides) 1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A. Telephone: 800.876.3333 • Fax: 800.765.3435 AtlasSound.com – 22 – Specifications are subject to change without notice.
MMK15-RM MMK17-RM Owner’s Manual 15" / 17" Single Rail Console 3.3 Install Modular KVM Switch Step 3.3.1 Hardware Kits Contents 1. Two Brackets with Thumb Screws 2. Four Screws (Length = 0.24" (6 mm)) 3.3.2 Install Modular KVM Switch 1. Install two screws (Length = 0.24" (6 mm)) to combine bracket and KVM switch. (Both sides) 2. Push KVM switch into the rails from rear of cabinet. 1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A. Telephone: 800.876.3333 • Fax: 800.765.
MMK15-RM MMK17-RM 15" / 17" Single Rail Console Owner’s Manual 3. Tighten thumb screw of bracket to fix KVM switch in console and finish installation. (Both sides) 3.4 Installing the Video Card and Video Driver Before connecting the LCD console, make sure your computer has a video card already installed for the monitor. After you connect the console, install the video software driver. The video driver is supplied by the video card manufacturer and may be found on the CD-ROM that came with your computer.
Owner’s Manual MMK15-RM MMK17-RM 15" / 17" Single Rail Console 3.4.2 Connecting the Console To connect an LCD console to a computer, perform the following steps Figure 3-1. The rear view of LCD console 1. Turn off your computer. You should always turn off your computer before connecting or disconnecting a device. 2. Connect the video (VGA) connector of the KVM cable to the video card connector on the rear panel of your computer. 3.
MMK15-RM MMK17-RM 15" / 17" Single Rail Console Owner’s Manual Notes: 1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A. Telephone: 800.876.3333 • Fax: 800.765.3435 AtlasSound.com – 26 – Specifications are subject to change without notice.
Owner’s Manual MMK15-RM MMK17-RM 15" / 17" Single Rail Console Notes: 1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A. Telephone: 800.876.3333 • Fax: 800.765.3435 – 27 – Specifications are subject to change without notice. AtlasSound.
MMK15-RM MMK17-RM 15" / 17" Single Rail Console Owner’s Manual All products manufactured by Atlas Sound are warranted to the original dealer/installer, industrial or commercial purchaser to be free from defects in material and workmanship and to be in compliance with our published specifications, if any.