Owner's Manual

MITEK CORP. © 2014
(preliminary)
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: [phone]
FAX [phone]
AtlasSound.com
1/3
©2014 Atlas Sound L.P. All rights reserved. Atlas Sound and Strategy Series are trademarks of Atlas Sound L.P. All other trademarks are the property of their respective owners. ATS004921 RevA 6/14
AA100PHD
100W Mixer Amplifier
AA100PHD
Features
• 100W Into 25V/70.7V and 41 Loads
• Automated Diagnostic System Test (Push Here Diagnostic)
• Two Balanced Mic/Line/Tel Inputs w/ Phantom Power
• Three Unbalanced, Summing Line Level Inputs
• Input Assignable Zone 2 Output
• Remote Level Control
• Remote Input Select (RIS)
• Line Output
• Preamp In for External Processors
• Variable Mute Sensitivity Control for Input 1
• Contact Closure Mute Terminals
• Rear Mounted DIP Switch Allows Mute Receive for Inputs 2 and 3
Application
The Atlas Sound AA100PHD is the perfect choice for distributed
business paging and background music (BGM) systems, small to
medium speech privacy systems, and in applications where music on
hold (MOH) plus paging is required.
General Description
The AA100PHD is a four input channel mixer amplifier designed for
distributed business paging and background music (BGM) systems,
small to medium speech privacy systems, and in applications where
music on hold (MOH) plus paging is required.
With one microphone/line input and two stereo line inputs, the
AA100PHD will accommodate a variety of input sources including paging
microphones, media players, and digital music receivers. The AA100PHD
includes a patent pending automatic system test, the Push Here
Diagnostic (PHD). The PHD button is designed to check the connected
speaker lines for wiring and impedance errors. This test can be activated
once all speakers are connected and the circuit automatically verifies
that the attached speakers' tap settings do not exceed the amplifier's
rated power, no speakers are mistakenly tapped at 81, and the speaker
wire is free from shorts. The unit also incorporates a Remote Input
Selection and Remote Level Control feature that allows the integrator to
use a remote wall plate (Atlas Sound model WPD-RISRL) and allow the
user to select the input and adjust the volume from that wall plate up to
200 feet from the amplifier.
The AA100PHD provides 100-watts output power into 25V, 70.7V, or
41 speaker systems. Rear panel DIP switch allows for creation of Zone
2 output/output mix using any or all of the four inputs. Unit can also be
set-up to mute Inputs 2, 3, and 4 based on signal from Input 1 for paging
applications where other input sources need to be muted during a page.
Input 1 and Input 2 are either Mic or Line input selectable and Phantom
Power is an option when using either as a mic.