Owner's Manual

– 5 – AtlasSound.com
Specifications are subject to change without notice.
Owner’s Manual
AP-S15A
AC Power Conditioner & Distribution
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: [phone] • Fax: [phone]
Introduction
Thank you for purchasing the Atlas Power AP-S15A AC Power Conditioner & Distribution Unit. The AP-S15A has been designed to
meet most installation requirements for AC power distribution and equipment power protection.
The AP-S15A features noise filtering for unwanted Radio Frequency Interference (RFI) that is commonly introduced into AC lines by
nearby radio transmitters or wireless products. EMI filters are incorporated to reduce noise from Electromagnetic Interference (EMI)
from such items as electric motors and switching power supplies. The benefit of these filters can be seen on video products or audibly
by reducing static pops and external signal interference.
The AP-S15A is unique in that the integrator can select the power cord length that is required for the installation. A removable 12' IEC
power cord with a retainer bracket is supplied with the unit. A shorter or longer cord can be purchased separately if needed.
Unstable AC Mains voltage is one of the main reasons for equipment failure. The amount of energy that can be injected into the power
system can be immense with voltages reaching 6kV or amperage peaks of 3000A. These spikes are very fast and usually only last for
a very short period of time. The AP-S15A’s circuitry is very fast and can suppress unwanted energy within a nanosecond response and
sustain the suppression up to 2 milliseconds, thus ensuring virtually trouble free protection. The front panel also features AC fault and
ground status indicators providing quick, visual reassurance the equipment is safe.
The AP-S15A offers power management control, noise filtering, and spike/surge protection, making it the most compact, effective
power management protection system on the market today.