Owner's Manual

– 13 –
AZA Series
Owner’s Manual
AtlasIED.com
TELEPHONE: [phone]
[e-mail]
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
Logging into The Amplifier The First Time
Once you have entered in the web browser via one of the methods listed above, you will be prompted to enter the factory default Username (admin)
and Password (admin). After entering the factory default Username and Password the AZA amplifier UI will open with a pop up window stating
“Default Password detected. You must change the password!”. Select close and go to the User Settings section to change the password.
Changing Login Username & Password For The First Time
After entering the factory default username and password the user will be prompted to change the unit’s password before continuing. At that time,
it is also recommended to update the username. Within the User Settings section, there is a drop down arrow to choose between Username and
Password. When finished select “SAVE” so the setting changes will take effect.
Resetting the Password
If the Username or Password are forgotten, a password reset will be needed. This will reset both the Username and Password back to factory default
of “admin”. DHCP will also be enabled. The DSP settings will not be changed. Refer to the section “Resetting the Login Password & Username”
Change UsernameChange Password