Owner's Manual

– 19 –
AZA Series
Owner’s Manual
AtlasIED.com
TELEPHONE: [phone]
[e-mail]
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
System
Type 4-Channel Configurable Network Digital Commercial Power Amplifier
Power Supply Type Global Switch Mode
Amp Topology Class AB Hybrid-BASH
Number of Fixed Inputs 4
Accessory Inputs 4 (Optional Accessory Card Required)
DSP Internal Ye s
Network Ethernet
Optional Card Slot Yes x 1
Output Power (Note 1) AZA404 AZA804
100V x 4 CH 100W 200W
70V x 4 CH (Factory Default) 100W 200W
8Ω x 4 CH 75W 150W
4Ω x 4 CH 50W 100W
2Ω x 4 CH NA NA
8Ω Bridge NA NA
4Ω Bridge NA NA
100V x 1 + 8Ω x 2CH 100W / 75W 200W / 150W
70V x 1 + 8Ω x 2CH 100W / 75W 200W / 150W
100V x 1 + 4Ω x 2 CH 100W / 50W 200W / 100W
70V x 1 + 4Ω x 2 CH 100W / 50W 200W / 100W
Factory Default Settings (As Shipped)
Amplifier Configuration 4 CH 70V Mode
Level Controls Assignment Front Panel
I/O Matrix Input 1 Routed to Output 1, Input 2 to Output 2, Input 3 to Output 3, Input 4 to Output 4
Level Position DSP Set to 0dBU
EQ & Filters DSP High Pass Filers Set to -3dB 20Hz, EQ Filters Flat
Limiter 0dB (Max Power)
GPIO Control Ports (Rear Panel) Remote Level, C1 Assigned to Output 1, C2 to Output 2, C3 to Output 3, C4 to Output 4
Auto Power Down (APD) Disabled
Inputs
Input Quantity 4 Balanced Inputs, Expandable to 8 via Dante Accessory Card
Input Type (Line Balanced or Unbalanced) Balanced
Input Impedance 40kΩ
Input Sensitivity 750mV Balanced, 0dBu
Maximum Input Level dBu & Vrms 14dBu, 3.82V
Input Connectors Type 3.5mm Euro Block
Accessory Slot 4 Input Dante™ Digital Card (DPA-DAC4)
Level Control
GUI Control PC (Requires Ethernet Cable), iPhone
®
, Android
®
Using a Standard Web Browser