Owner's Manual

AtlasSound.com
1/4
©2017 Atlas Sound L.P. All rights reserved. Atlas Sound and Strategy Series are trademarks of Atlas Sound L.P. All other trademarks are the property of their respective owners. ATS003678 RevF 1/17
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: [phone]
FAX [phone]
FAP62T-UL2043
Strategy Series
®
II In-Ceiling 6" Coaxial Speaker System
3PECIÚCATIONS
Power Rating 50 Watts
Transformer Taps 2, 4, 8, 16, & 32 Watts
Frequency Response 63Hz – 20kHz (±7dB)
Sensitivity (1W / 1M) 88dB
Woofer 6" Poly Cone with Butyl Rubber Surround
Woofer Magnet Weight 14oz (398g)
Enclosure Volume 475 in
3
HF Driver 19mm Coaxially Mounted PEI Dome Tweeter
Diameter 12
1
/2" (318mm)
Overall Height 8.48" (215mm)
Cut-out Dimensions 11" (279mm)
&EATURES
• Extended Low Frequency Response from the 475 in
3
Optimally Tuned
and Ported Deep Drawn Galvanized Steel Enclosure
• Easy Installation in Drop Tile or Sheetrock Ceilings Via C-Ring / V-Rail
Tile Bridge and “Dog Leg” Mounting System (Included)
• Front Mounted Tap Selector Switch for Easy System Tuning
Adjustments Include Transformer Bypass Setting for 81 Direct
Coupled Operation
• Unique “Trap Door” Input Section Allows for Through Conduit Runs
with Rigid or Flex Conduit
• 4 Pole Detachable “Phoenix” Style Connector Allows Easy Pre-Wiring
and Is Convenient for Daisy Chaining Additional Strategy Series Full
Range Speakers or Subwoofers
• “Press Fit” Grilles Blend Better into Contemporary Architecture
• Enhanced Quality 70.7V / 100V Internal Transformers Minimize
Insertion Loss and Maintain Low Frequency Response While
Providing Increased Output for Higher SPL Applications
• UL Listed 1480 & 2043
!PPLICATIONS
The FAP62T-UL2043 combines superior coaxial loudspeaker performance
with even dispersion and easy installation. A low profile enclosure
and wide coverage make the FAP62T-UL2043 a perfect choice for low
ceilings. The FAP62T-UL2043 will satisfy the needs of owners, architects,
contractors, and consultants by delivering true, high fidelity sound
reproduction in an attractive and easy-to-install system. The
FAP62T-UL2043 is ideal for high-intelligibility voice, music, and signal
reproduction in commercial, industrial, and institutional applications. The
FAP62T-UL2043 is UL1480 and UL2043 Listed allowing for installation in
true plenum air spaces.
'ENERAL$ESCRIPTION
The FAP62T-UL2043's 110° dispersion angle can reduce the number of
FAP62T-UL2043’s necessary to achieve coverage in distributed systems
with low ceilings.
The loudspeaker component matches the performance of the legendary
Atlas Sound FA136 driver. High quality construction 6" coaxial cone
type driver includes a 1" voice coil and polypropylene cone with a butyl
rubber surround. The 19mm coaxially mounted tweeter is constructed of
PEI. A high sensitivity of 88dB average (92dB peak) means less power
may be required to achieve the desired SPL. This loudspeaker is factory
assembled in an optimally tuned and ported deep drawn enclosure
and includes a specially designed 32 watt low saturation 70.7V / 100V
transformer. A convenient front mounted selector switch allows tap
selection without the need to remove the speaker from the ceiling. This
switch also includes a transformer bypass setting for 81 direct coupled
operation.
IÚ
I
FAP62T-UL2043