Datasheet

ManualsBrandsAtlasScientific ManualsRobot PartsMicro PT-1000 Temperature Probe

Temperature Probe

Micro

PT-1000

Range -200˚C to 200˚C

+/- (0.15 + (0.002*t))Accuracy

61cm (2’)Cable length

Resistance (Analog)Output

Reads Temperature

Male SMAConnector

90% in 10sReaction Time

15 yearsLife expectancy

Class A platinum, RTDProbe type

Released 9/21

V 1.1

Summary of content (7 pages)

PAGE 1
V 1.1 Released 9/21 Micro PT-1000 Temperature Probe Reads Probe type Range Accuracy Reaction Time Cable length Connector Output Life expectancy Temperature Class A platinum, RTD -200˚C to 200˚C +/- (0.15 + (0.
PAGE 2
Measurements Cable Length 61cm (2’) Ø 2.6mm Ø 8mm 9.8mm (0.3”) Ø 9.1mm 24.6mm (0.9”) Thread size 1/4 28 UNF 21.5mm (0.8”) 14.3mm (0.5”) Protective Cap 4mm 6.2mm (0.
PAGE 3
Specifications Cable length Weight Min cable temp Max cable temp Sensing material Dimensions SMA connector Sterilization Food safe 61cm (2') 16 grams -55°C 125°C Platinum 6.2mm x 24.1mm (0.2" x 0.9") Male Chemical only Yes Materials PEEK PVC Polyethylene Glass Titanium Nitride This Micro PT-1000 probe can be fully submerged in fresh or salt water, up to the SMA connector indefinitely.
PAGE 4
NSF/ANSI 51 Compliant Atlas Scientific LLC, hereby certifies that, Micro RTD Temperature Probe Part # M-PT-1000 Complies with NSF/ANSI Standard 51 PVC Polyethylene Titanium Nitride PVC NSF/ANSI 51 Compliant PEEK PEEK NSF/ANSI 51 Compliant Glass NSF/ANSI 51 Compliant Polyethylene NSF/ANSI 51 Compliant Titanium Nitride NSF/ANSI 51 Compliant 4 Copyright © Atlas Scientific LLC Glass
PAGE 5
Operating principle Unlike any other material, platinums correlation between resistance and temperature seems to be woven into the fabric of the universe. It is for this reason, that the platinum RTD temperature sensor is the industrial standard for temperature measurement. Resistance 78 Nickel Pt Platinum 195.
PAGE 6
A PT-1000 temperature probe is a resistance type thermometer. Where PT stands for platinum and 1000 is the measured resistance of the probe at 0˚C in ohms (1k at 0˚C). As the temperature changes the resistance of the platinum changes.
PAGE 7
Extending the probe cable length You can extend the cable to greater than 100 meters with no loss of signal. Atlas Scientific has tested up to 300 meters without a problem, however you run the risk of turning your temperature probe into an antennae, picking up noise along the length of your cable. If you want to extend your cable, we recommend that you use proper isolation, such as the Basic EZO TM Inline Voltage Isolator, or the Electrically Isolated EZO™ Carrier Board.