Data Sheet
Removing tube assembly
Installing new tube assembly
1
1 2 3
2
Click
75mm
Click
1 2
Click
Gently push down the tube holder
until it clicks, then remove.
Measure 75mm of pump tubing, and mark
both ends with a soft-tip pen or marker.
Apply silicone lubricating grease to the
marked areas on both the tubing and
cassette axle.
Turn the cassette around, and carefully
remove rotor and pump tube.
Tube holder
Rotor
Inline tubing
connector
Tube
The inner workings of the cassette are fragile and must be dismantled by hand.
Using tools can damage or break the cassette.
1
1 2 3
2
Click
75mm
Click
1 2
Click
1
1 2 3
2
Click
75mm
Click
1 2
Click
Cassette axle
Apply grease
75mm mark
Do not operate this device
without lubrication!
1
2
Atlas Scientific recommends using Super Lube
silicone lubricating grease.
r 0.2
7 Copyright © Atlas Scientic LLC