Data Sheet

Manual switching to I
2
C
Make sure Plock is set to 0
Disconnect ground (power off)
Disconnect TX and RX
Connect TX to INT
Conrm RX is disconnected
Connect ground (power on)
Wait for LED to change from Green to Blue
Disconnect ground (power off)
Reconnect all data and power
•
•
•
•
•
•
•
•
•
Short
Short
Wrong Example
Example
Disconnect RX line
Manually switching to I
2
C will set the I
2
C address to 103 (0x67)
r 0.1
TX
RX
INT
42 Copyright © Atlas Scientic LLC