User Manual

@ 2020 ATLI EON copyright reserved
5
To charge ATLI EON, connect a USB adapter (not included) to the USB-C port using
the power cable (included). Status LED will stay in red while charging and change
to green once charging is completed.
Charging time: approx.5 to 6 hours.
*Charging time is for reference only.
Charging ATLI EON
a. Press and hold the power button for 4-5 seconds to boost the camera. Wait
approximately 30 seconds till the status LED changes from orange to green.
b. Open ATLI Cam App, and click on “Add Camera” to scan the camera QR code.
Each ATLI EON camera has its own QR code, you can find it in either the “Quick
User Guide” attached in the box or inside the camera battery compartment.
Connecting ATLI EON
c. Close the battery compartment cover.
b. Insert the battery as shown below.
Please Install the battery before using this product.
a. Locate the battery compartment cover opening slot, and open the cover by
pulling from it.
ATLI EON User Manual