Warranty Manual

AT-GAIN-120
17
Basic Operation
Using the Web GUI
The Network page (page 32) in the web GUI allows the option for the AT-GAIN-120 to use either DHCP or static IP
mode. In order to access the web GUI, the IP address of the AT-GAIN-120 must be known.
1. Open the desired web browser and enter the IP address of the AT-GAIN-120.
2. Log in, using the required credentials. The factory-default username and password are listed below:
Username: admin
Password: Atlona
3. Click the Network tab, located on the side menu bar.
a. Click OFF, next to DHCP.
b. Enter the required information in the IP Address, Subnet, and Gateway elds.
a. Click ON, next to DHCP.
4. Click the Save button to save the changes.
• Setting static IP mode
• Setting DHCP mode