Warranty Manual

AT-GAIN-120
22
Basic Operation
1. Open the desired web browser and enter the IP address of the AT-GAIN-120.
2. Log in, using the required credentials. The factory-default username and password are listed below:
Username: admin
Password: Atlona
3. Click the Audio tab, located on the side menu bar. The Audio and Equalization settings will be displayed.
When the optional AT-GAIN-NET card is installed, switching between the ANALOG IN and the audio input on the AT-
GAIN-NET card can be performed either manually or automatically. The following section covers both methods.
The AT-GAIN-NET card is available from Atlona.
Input Switching
Manual Switching
4. Click the Inut Selection drop-down list to select the desired audio input. The currently selected audio input will
be display in both the web GUI and on the front panel LED indicators. Refer to LED Indicators (page 19) for
more information.