Installation Guide

ManualsBrandsAtlona ManualsAmplifiersAtlona - Gain 60W 2.0-Ch. Stereo/Mono Power Amplifier - Black

Installation Guide

AT-GAIN-60

Stereo / Mono Audio Power Amplier - 60 Watts

AT-GAIN-60

1 x AT-GAIN-60

1 x Captive screw connector, 2-pin

1 x Captive screw connector, 3-pin

1 x Captive screw connector, 4-pin

1 x Captive screw connector, 5-pin

1 x 28 V / 3.4 A DC power supply

1 x Installation Guide

Package Contents

The Atlona Gain™ 60 (AT-GAIN-60) is a compact power amplier designed for low or high

impedance applications. A mode selector switch allows the Gain 60 to deliver two channels

of 30 watts each into 4 or 8 ohms, or a single channel of 60 watts at 24, 70,or 100 volts.

This Class-D amplier is energy ecient and convection-cooled without the need for fans.

Additionally, the Gain 60 is UL 2043 plenum-rated, allowing convenient yet discreet installation

in a plenum airspace above a drop ceiling. Selectable balanced captive screw and unbalanced

RCA inputs are provided for system design versatility. The Gain 60 is controllable via TCP/

IP or RS-232, and can be integrated with Atlona AV switchers, HDBaseT™ receivers, and

OmniStream™ AV decoders and audio devices for a wide variety of sound reinforcement

applications.

IMPORTANT: Visit http://www.atlona.com/product/AT-GAIN-60 for the latest rmware

updates and User Manual.

Summary of content (12 pages)

PAGE 1
Installation Guide AT-GAIN-60 Stereo / Mono Audio Power Amplifier - 60 Watts AT-GAIN-60 The Atlona Gain™ 60 (AT-GAIN-60) is a compact power amplifier designed for low or high impedance applications. A mode selector switch allows the Gain 60 to deliver two channels of 30 watts each into 4 or 8 ohms, or a single channel of 60 watts at 24, 70,or 100 volts. This Class-D amplifier is energy efficient and convection-cooled without the need for fans.
PAGE 2
Installation Guide AT-GAIN-60 Panel Description 2 4 8 Front 9 11 13 15 16 Rear L TX RX R -14 CLASS 2 WIRING 24 / 70 / 100V OUT -4 L -9 -2 R -19 -20 -22 dB 1 1 TX RX L R 3 5 CLASS 2 WIRING 24 / 70 / 100V OUT -4 L 6 7 AUDIO IN 2 INPUT GAIN 10 12 CLASS 2 WIRING 14 DC28V 3.4A 17 PWR This LED indicator glows solid green when the unit is powered. When set to standby mode, this LED indicator glows solid amber.
PAGE 3
Installation Guide AT-GAIN-60 RS-232 Connector The AT-GAIN-60 provides RS-232 control between an automation system and an RS-232 device. This step is optional. 1. Use wire strippers to remove a portion of the cable jacket. 2. Remove at least 3/16” (5 mm) from the insulation of the RX, TX, and GND wires. 3. Insert the TX, RX, and GND wires into correct terminal on the included captive screw block.
PAGE 4
Installation Guide AT-GAIN-60 Installation 1. 2. Connect an analog audio source to the AUDIO IN ports. Once connected, press the INPUT button on the front panel, to switch between the RCA and the 5-pin captive screw port. • RCA cables (unbalanced) Connect shielded RCA-type cables from the audio source to the AUDIO IN 2 left/right RCA jacks. • Balanced/Unbalanced Connect the included 5-pin captive screw to the AUDIO IN 1 port. Use the desired wiring configuration, on the previous page.
PAGE 5
Installation Guide AT-GAIN-60 IP Configuration By default, the AT-GAIN-60 is set to DHCP mode, allowing a DHCP server (if present) to assign the unit an IP address. Switching the IP mode Press and hold the INPUT button for approximately 10 seconds. Release the button once both input LED indicators 1 and 2 begin to flash.
PAGE 6
Installation Guide AT-GAIN-60 AMS 2.0 For easy configuration of Atlona devices, AMS 2.0 is available from https://atlona.com/ams for free. Two options can be used for installation: The free Linux-based software download or the easy-to-install server hardware (AT-AMS-HW). Once AMS has been set up: 1. Open a browser on the same network as AMS 2.0 and go to the IP address of AMS 2.0. View the AMS 2.0 installation instructions on how to find the IP address of the software, if necessary. 2.
PAGE 7
Installation Guide AT-GAIN-60 Connection Diagrams Program / Stereo Speakers Application Program Speakers eric Gen SYSTEMS SPEAKER Laptop eric SYSTEMS Tablet (BYOD) Gen SPEAKER Vi o de di Au Au di o o di Au o AY DISPL 2 DC AT-VGW-250 19V T 1 ETHERNE INPUT USB-C OUT DP HDMI -250 MDP OUT HDMI AT-VGW 3 4 HDMI Et he rn et BYOD he Et AT-GAIN-60 Vid eo 0W ne W-51 HD-S t AT-U Et he rn et AT-UHD-SW-510W Et he rn et /P oE LAN AT-VTP-800-WH UHD/HD Display Di
PAGE 8
Installation Guide AT-GAIN-60 Mounting Instructions Mounting three AT-GAIN-60 units The following provides instructions for mounting up to three AT-GAIN-60 unit in the AT-RACK-1U (not included). 1. Turn the AT-GAIN-60 so that the bottom of the unit is facing upward. 2.
PAGE 9
Installation Guide AT-GAIN-60 3. Mount each of the AT-GAIN-60 units in the rack. Match the mounting holes on the bottom of each AT-GAIN-60 with the holes in the rack tray, marked in the illustration below. TOP Front of rack tray 4. Install the rack tray in the rack shelf and secure the rack tray with two screws on either side.
PAGE 10
Installation Guide AT-GAIN-60 Mounting two AT-GAIN-60 units The following provides an alternate method for mounting AT-GAIN-60 units closer together. This option provides extra space in the AT-RACK-1U (not included) for cabling, etc. 1. Turn the AT-GAIN-60 so that the bottom of the unit is facing upward. 2. Locate the two sets of holes on either side of the unit. Refer to page 7 for the location of the mounting holes. 3. Mount each of the AT-GAIN-60 units in the rack.
PAGE 11
Installation Guide AT-GAIN-60 Notes 11
PAGE 12
Installation Guide AT-GAIN-60 Version 2 atlona.com • 408.962.0515 • 877.536.3976 © 2018 Atlona Inc. All rights reserved. “Atlona” and the Atlona logo are registered trademarks of Atlona Inc. All other brand names and trademarks or registered trademarks are the property of their respective owners. Pricing, specifications and availability subject to change without notice. Actual products, product images, and online product images may vary from images shown here.