Warranty Manual

AT-GAIN-60

Installation

Using the Web GUI

The Network page (page 28) in the web GUI allows the option for the AT-GAIN-60 to use either DHCP or static IP

mode. In order to access the web GUI, the IP address of the AT-GAIN-60 must be known.

1. Open the desired web browser and enter the IP address of the AT-GAIN-60.

2. Log in, using the required credentials. The factory-default username and password are listed below:

Username: admin

Password: Atlona

3. Click the Network tab, located on the side menu bar.

a. Click OFF, next to DHCP.

b. Enter the required information in the IP Address, Subnet, and Gateway elds.

a. Click ON, next to DHCP.

4. Click the Save button to save the changes.

• Setting static IP mode

• Setting DHCP mode