Warranty Manual

AT-GAIN-60
30
Control page
The Web GUI
Power
Click the ON button to power-on the AT-GAIN-60. Click the OFF button to power-o the unit.
Auto Power On
Settings this feature to ON will automatically power-on the AT-GAIN-60 when an incoming audio signal is detected.
The default setting is ON. Refer to Auto Power On mode (page 22) for more information.
Auto Power Down
Enables or disables auto power down mode. Refer to Auto Power Down mode (page 22) for more information.
Auto Power Down Time (min)
Specify the time interval before the AT-GAIN-60 goes into auto power down mode. Refer to Auto Power Down mode
(page 22) for more information. The default setting is 15 minutes.
Factory Default
Click this button to reset the AT-GAIN-60 to factory-default settings.
Blink
Click the Blink button to start blinking the PWR LED indicator. This feature is useful to identify the unit when multiple
units are being used.
Front Panel
Click to lock or unlock the buttons on the front panel. Locking the front panel buttons is useful in preventing
accidental button activation within rack environments.