Warranty Manual

AT-GAIN-60
36
Appendix
Rack Mount Installation
The AT-GAIN-60 can be mounted in dierent ways, based on the number of units that are being installed.
In order to rack-mount the AT-GAIN-60, the AT-RACK-1RU will need to be purchased from atlona.com.
The AT-RACK-1RU can be used to either mount three AT-GAIN-60 unit at once or it can be used to mount two AT-
GAIN units.
AT-RACK-1RU
Front of unit
Mounting Holes
BOTTOM
1. Turn the AT-GAIN-60 so that the
bottom of the unit is facing upward.
2. Locate the two sets of holes on
either side of the unit, as shown.
Mounting three AT-GAIN-60 units
IMPORTANT: Before mounting the AT-GAIN-60 to the AT-RACK-1RU, remove the rubber feet from
the bottom of the unit.